CORRIZON™ BASE


CORRIZON-BASE IS A SINGLE COMPONENT WATERBORNE BASE METAL PROTECTING PRIMER. IT HAS ANTI-CORROSION PROPERTIES AND ACTS AS AN OXYGEN SCAVENGER THAT PENETRATES METAL SUBSTRATES, REPLACES OXYGEN MOLECULES THUS PREVENTS CORROSION FROM RECURRING.

Corrizon-Base is a green product, ready to use without dilution, odorless, environmentally friendly and dose not contain VOC. Thus, compatible with UL standard certifications – GreenGuard & GreenGuard Gold.

One of the major advantages of Corrizon-Base is that it does not require any special surface preparations. Corrizon-Base can be applied directly on adherent rust remaining on the surface, damp surfaces and it’s suitable for interior and exterior use.

The application requires a very thin layer and can be done using simple equipment such as brushes, rollers, spray guns, airless spray etc.  All tools can be cleaned easily with water. Corrizon-Base has a very fast curing in a wide temperature range. Corrizon-Base can be applied on galvanic metal or painted steel as it penetrates the coats before getting to the metal. Corrizon-Base is also compatible with most top coats and paints.

Furthermore, Corrizon-Base has a good chemical resistance to splash/spillage, fumes and immersion in natural, fresh and salt water. Metallurgic tests have shown that rust was not observed on the base metal after 3600 hours in a salty atmosphere and there is no change in the mechanical properties of the steel.

FOR MORE INFORMATION, PLEASE CONTACT US.

Related Documents:

TDS

SDS

Application Bulletin